| Description: |
Single
toggle jaw crusher with jaw aperture of 20 in. x 8 in. – will
crush a full kerbstone in approximately 32 seconds. The 5000 series
is 4 ft. wide and can enter sites where access and space are restricted.
Instantly hydraulically adjustable jaws allow for the adjustment
of output product size, ranging from a choice of 1/4 in. up to 4
in. |
| Material: |
The
5000 series will crush concrete, kerbstone, marble, paving slabs,
bricks, tiles, blocks, stone, porcelain, flint, gravestones, etc. |
| Output: |
Output
will vary according to jaw setting, loading method, loading equipment,
input material, and familiarity of the loading operator. In excess
of 15t. per hour has been achieved. |
| Jaws: |
Instant
hydraulic adjustment lever allows for the quick release of material
and adjustment of product size. A hydraulic ‘reverse’
action is also provided to enable an ‘upwards’ movement
of material. A hydraulic pressure relief valve and further safety
features are fitted as standard to protect the crusher. Jaw plates
are made of 14% manganese steel which will ‘work-harden’.
The jaws are reversible. |
| Reinforced
concrete & steel: |
For
steel and reinforced concrete it is recommended that you protect
your conveyor belt and crush this material having removed the conveyor
belt. Removal of the output conveyor system is quick and easy. |
| Engine: |
The
engine is a Duetz 30hp water-cooled diesel set at 2,600rpm, but
capable of 3000rpm – the engine is therefore overpowered for
its purpose. The engine is economical using red or white diesel.
The fuel tank capacity is 5 1/4 gallons, with fuel consumption of
approximately 1 gallon per hour full throttle crushing. |
| Tracks
& Controls: |
Tracks
are rubber and controlled by an umbilical cord for safe loading,
unloading and tracking. Controls are simple and clearly labeled.
A hydraulic oil cooler is fitted to ensure longer life of hydraulic
equipment and for hotter climates. |
| Conveyor
& Dust Suppression: |
Dust
suppression is fitted as standard and is by means of fine water
spray nozzles, utilizing standard domestic hose pressure. The output
conveyor is simple in design with a moulded belt providing strength
and durability. The conveyorsystem can be removed quickly. |
| Loading: |
Maximum
productivity is achieved by correct loading of the crusher. This
is a steady feeding of the hopper, ensuring that the jaw or hopper
is not over-loaded, using a maximum 3t mini excavator and maximum
18 inch bucket. Optimum tonnage per hour is achieved by ensuring
the excavator is positioned directly in-line with the rear of the
machine, and that the excavator operator has a clear line of sight
with the jaws. |
| Conveyor
Mounted Screener Attachment: (optional) |
An
option conveyor mounted screener is available for the separation
of dust and topsoil from the crushing process. Supplied with a 1/3
in. mesh, the screener can also assist with the creation of decorative
aggregates. |
|
Safety
& Maintenance: |
There
are two emergency cut-out switches located to either side of the
machine, and the front inspection panel is fitted with an emergency
cut-out switch. The engine cover is lockable and an optional engine
immobilizer is available. A central external greasing point is fitted
to all for the greasing of the flywheel (4 shots every 10 hours).
The engine requires an air, oil and fuel filter change every 250
hours. |
